Description
ZESTA D3 is an aqueous polyvinyl acetate dispersion stabilized with polyvinyl alcohol. It is cross-linked polymer with excellent moisture, water resistance & comparable to the requirements of EN 204 categories D3/3● The surfaces to be bonded should be free from dust, oil and grease. They should be dry and properly leveled
●For best results, roughen the surfaces to be bonded.
● Stir contents of the container before use.
●Apply an even coat of ZESTA D3 first on comparatively non-porous
● surfaces and then on porous surfaces, for e.g. apply first on laminate and then on wood.
● If possible, application should be lengthwise on one surface and breadth wise on the other surface. This will help in proper and uniform spreading of adhesive while pressing.
● For ply to laminate: Before allowing adhesive to dry, bring both surfaces in contact, align properly and start.
● Pressing from one side by using wet squeezed cloth to avoid bubbles, and ensure uniform contact.
● For Wood To Wood: Before allowing adhesive to dry, bring both the surfaces in contact and align properly To get best results keep
● them pressed for 24 hours.
● Excess adhesive that oozes out from edges should be wiped off with a wet squeezed cloth.
●Pressure can be applied by using nails, clamps, weight, Resitape, Cold Press, Hot Press, Roller Press, etc.
5 Stars
(0)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
share your experience/views about this product
